Axis Lighting
If you're just starting out with video production, lighting your video shoot can be tricky. So, bottom line, make absolutely sure you have a catch light—in both eyes—unless you have a specific and planned reason not to. This photo tip is one of the vital rules of portrait photography that should never be broken whether you are shooting people, pets, or anything else with eyes.
To side light a small product, you're going to need a large table, a continuous or strobe light, an umbrella, foam boards, and a roll of seamless white paper. Whatever bulb you select, set your camera's white balance accordingly and use a grey card to ensure your colors are captured as accurately as possible.
To prepare your clamp lighting for your photo or video shoot, I suggest putting together three of them. Luckily new, easy on the pocket, rings lights like the Orbis ($200) and the DIY Ring Flash ($25) provide access to this wonderful tool to the budget minded photographer as long as they own a small hot shoe strobe.
Ring flashes are used for macro photography we have seen them on the CSI series, or you can use it for shooting portraits You can get one on eBay which will cost from 50$ up to 250$. The structure of the ring light allows attaching an umbrella softbox reflector for taking proficient photos.
For fast shutter speeds to avoid blur caused by subject or camera movement, you need a lot of light. PROS: Constant light output is easy to preview and meter; often inexpensive; easy to use; usable with any camera shooting mode (program AE, for example). We are going to put the led lights in the middle of the PVC pipe and the bowl, creating a perfect circle, and connect them with the batteries to have a source of energy.
This is a very simplistic setup to illustrate the point but this problem is far more apparent when using very hard light sources like grids and snoots. Also, this ring light for photography has a tilting mount which is very useful if you need to direct the light onto a model at a certain angle.
You also want to create specular highlight, which is the unlocking of certain details that are only reachable when using a proper flash on the subject's skin. As a continuous light source, they remove concern over flash sync speeds and dedicated connections of any kind.
In this course, photographer and educator Abba Shapiro details the why and how behind using LED panels and other continuous lighting sources for photography. Flash can be used as fill light to bring out the details, colours and textures of your subject, especially in the shadows.
One of the easiest and most efficient lighting setups for apparel photography can be created with a large window and natural sunlight streaming through it. Below is an example of this setup as a bird's-eye-view diagram so that you can visualize the setup before you try it.
No matter the method you choose, remember to keep your background white, which will allow your product to stand out without any distractions and give your images a clean and professional look. It was promoted by John Shaw and Larry West in their workshops and books and marked the Best YouTube Ring light beginning of my fascination with flash brackets and macro photography, and also my search for a better light system.